Chemical Polydadmac Coagulant 90% Cationic Macromolecule Flocculant Powder Chemicals To Purify Water For Drinking
Trade name: PDADMAC powder
Descrition:
| Trade name | Cationic macromolecule flocculant powder |
| Appearance | White powder |
| Solid Content% | 90% |
| PH (1% Aq. solution) | 3-6 |
| Viscosity (1% Aq. solution) | 5-50 cps/lv, 2#, 60rpm.25 |
| Hygroscopicity | Easy |
Product Application:
PDADMAC is organic synthetic macromolecule polymers, which is widely used in industrial waste water and surface water purification, as well as sludge thickening and dewatering.It can improve water clarity at a relatively low dose.It has good activity that fast the sedimentation rate.It is suitable for a wide range of PH (4-13).
This product is also used in the colliery waste water, papermaking waste water, oil field and oil refinery oily wastewater and urban sewage treatment.
Recommend Using Method:
The product need to be prepared in factories equipped with dosing and distribution device .It is in need of sustained moderate stirring. Water temperature control between 10 -40 ℃. The required amount of this product depends on the quality of water or characteristics of sludge, Ior judged by experiment.
Specifications:
| Product code | PD LS 41 | PD LS 45 | PD LS 49 | PD LS 40HV | PD LS 35 | PD LS 20 | PD LS 20HV |
| Appearance | Colorless to Pale Amber Liquid, Free from Foreign Matter | |
| Solid content (120℃,2h) % | 39-41 | 34-36 | 19.0-21.0 |
| Viscosity (25℃) | 1000-3000 | 2500-5000 | 8000-13000 | 150000 | 200-1000 | 100-1000 | 1000-2000 |
| PH | 5.0-8.0 |
Concentration and viscosity of solution can be customized according to customers’ needs.
| Appearance | white or light yellow powder |
| mpa.s | 1000~3000 | 3000-6000 | 6000-9000 | 8000-12000 | 10,0000～40,0000 |
| PH 1% water solution | 5~7 |
| Solid content % | 88 |
| Note: our product can be made upon your special request. |
Application Method:
1. When used alone, it should be diluted to the concentration of 0.5%-0.05% (based on solid content).
2. In dealing with different source water or waste water, the dosage is based on the turbidity and the concentration of the water. The most economical dosage is based on the trial.
3.The dosing spot and the mixing velocity should be carefully decided to guarantee that the chemical can be mixed evenly with the other chemicals in the water and the flocs can not be broken.
4. it is better to dose the product continuously.
Application Field:
1. The polymer body contains strong cationic group radical and activated-adsorbent group radical which can destabilize and flocculate the suspended solids and the negative-charged water soluble matters in the waste water through electro-neutralization and bridging adsorption. It is very effective in flocculating, decoloring, killing algae and removing organics.
2. The product enjoys small dosage but can cause big flocs, rapid precipitation and low turbidity residue, and it can also produce small amount of sludge. It is adaptable to wide range of pH value, between 4.0 and 10.0.
3. It is smelless, tasteless and harmless. It can be widely used to treat source water and sewage water.
Package and Storage
Package:210kgs,1100kgs
Shelf life: one year
Storage: This product should be sealed and stored in a dry and cool place. If there appears stratification after the long-term storage, it can be mixed before being used.
Attention:
The washing tank is must be washed thorough before fixing,for fear of oddment affect fixing effect.
It is favorable to fixing color that raise the fixing color dose and temperature ,but excess could result in color transform.
Setting detailed fixing process should accorading with factory matter of factory and experiment.
Health and Safety:
The product can irritate the eyes and skin. Rubber gloves, goggles and protective clothing are recommended for use while handling. Spilled polymer is slippery and should be flushed with water.
Product Tags:
|
|
Chemical Polydadmac Coagulant 90% Cationic Macromolecule Flocculant Powder Chemicals To Purify Water For Drinking Images
|
